LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2010 >> Forester XS, Automatic >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Anti-Theft System - Security And Locks >> Body Integrated Unit >> Removal

Body Integrated Unit: Removal

NOTE:
  1. Disconnect the ground cable from the battery.
  2. Remove the driver's side instrument panel lower cover. Refer to REMOVAL , Instrument Panel Lower Cover.
  3. Remove the knee guard panel.
  4. Disconnect the connector of body integrated unit.
    CAUTION: Be careful to keep water and other foreign materials away from body integrated unit.
  5. Remove two mounting nuts for body integrated unit bracket, and remove the body integrated unit.
Fig 1: Locating Body Integrated Unit Bracket Mounting Nuts
G05663711Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals