LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2009 >> Tribeca Limited >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Brake System - Brakes - Mechanical >> Rear Brake Pad >> Removal

Rear Brake Pad: Removal

  1. Lift up the vehicle, and then remove the rear wheels.
  2. Remove the brake hose bracket.
    Fig 1: Locating Brake Hose Bracket Bolt
    G05032773Courtesy of SUBARU OF AMERICA, INC.
  3. Remove the caliper bolt.
    Fig 2: Locating Caliper Bolt
    G05032774Courtesy of SUBARU OF AMERICA, INC.
  4. Raise the caliper body and support it.
    NOTE: Do not disconnect the brake hose from the caliper body.
  5. Remove the pad.
    Fig 3: Removing Pad
    G05032775Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals