LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2009 >> Tribeca Limited >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Brake System - Brakes - Mechanical >> Master Cylinder >> Installation

Master Cylinder: Installation

  1. Install in the reverse order of removal.

    Tightening torque: 

    Master cylinder mounting nut 

    25 N.m (2.5 kgf-m, 18.4 ft-lb) 

    Brake pipe 

    19 N.m (1.9 kgf-m, 14.0 ft-lb) 

    CAUTION: Be sure to use recommended brake fluid.
  2. Bleed air from brake system. Ref. to PROCEDURE , Air Bleeding.
scientia non olet · About LEMON Manuals