LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2009 >> Tribeca Limited >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Brake System - Brakes - Mechanical >> General Description >> Specification

Brake System - Brakes - Mechanical: General Description: Specification

GENERAL SPECIFICATION

Front disc brake Type Disc (Floating type, ventilated)
Effective disc diameter mm (in) 261 (10.28)
Disc thickness x Diameter mm (in) 30 x 316 (1.18 x 12.44)
Effective cylinder diameter 42.8 (1.685) x 2
Pad dimensions (Length x Width x Thickness) mm (in) 130.0 x 53.5 x 11.0 (5.118 x 2.106 x 0.433)
Clearance adjustment Automatic adjustment
Rear disc brake Type Disc (Floating type, ventilated)
Effective disc diameter mm (in) 284.5 (11.2)
Disc thickness x Diameter mm (in) 18 x 320 (0.71 x 12.59)
Effective cylinder diameter mm (in) 40.46 (1.592)
Pad dimensions (Length x Width x Thickness) mm (in) 95.5 x 34.8 x 11.0 (3.759 x 1.370 x 0.433)
Clearance adjustment Automatic adjustment
Master cylinder Type Tandem
Effective diameter mm (in) 23.8 (15/16)
Reservoir type Sealed type
Brake fluid reservoir capacity cm3 (cu in) 285 (17.39)
Brake booster Type Vacuum suspended
Effective diameter mm (in) 238 + 261 (9.37+10.28)
Brake line Dual circuit system
Brake fluid
CAUTION:
  • Avoid mixing brake fluid of different brands to prevent fluid performance from degrading.
  • When filling with brake fluid, be careful not to allow any dust to enter the reservoir.
  • Use new SUBARU genuine brake fluid when replacing or refilling the fluid.
FMVSS No. 116, DOT3
NOTE: Refer to "PARKING BRAKE" article for parking brake specifications. Ref. to SPECIFICATION , General Description.
FRONT BRAKE SPECIFICATION

Contents Standard Limit
Front brake Pad thickness mm (in) 11 (0.43) 1.5 (0.059)
Disc thickness mm (in) 30 (1.18) 28 (1.10)
Disc runout mm (in) - 0.05 (0.0020)
Rear brake (disc type) Pad thickness mm (in) 11.0 (0.433) 1.5 (0.059)
Disc thickness mm (in) 18 (0.71) 16 (0.63)
Disc runout mm (in) - 0.05 (0.0020)
Parking brake Inside diameter mm (in) 210 (8.27) 211 (8.31)
Lining thickness mm (in) 4.0 (0.157) 1.5 (0.059)
Pedal stroke 5 to 6 notches/300 N (30 kgf, 67.5 lb)
BRAKE BOOSTER SPECIFICATION

Brake pedal force N (kgf, lb) Fluid pressure kPa (kgf/cm2 , psi)
Brake booster Brake fluid pressure with engine stopped 147 (15, 33) 590 (6, 86)
294 (30, 66) 1654 (17, 240)
Brake fluid pressure with engine running and vacuum pressure at 66.7 kPa (500 mmHg, 19.69 inHg) 147 (15, 33) 8539 (87, 1238)
294 (30, 66) 15373 (157, 2229)
BRAKE PEDAL SPECIFICATION

Brake pedal Free play mm (in) 0.5 - 2 (0.02 - 0.08)
[When pulling the brake pedal upward with a force of less than 10 N (1 kgf, 2 lb)]