LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2009 >> Outback i, Standard >> Repair and Diagnosis >> Engine Mechanical >> Timing Belt >> Engine Mechanical (H4SO) >> Crank Pulley >> Removal

Crank Pulley: Removal

NOTE: When replacing the single part, perform the work with the engine installed to body.
  1. Remove the V-belts. Refer to REMOVAL , V-belt.
  2. Use the ST to lock the crank pulley, and remove the crank pulley bolts.

    ST 499977100 CRANK PULLEY WRENCH (MT MODEL)

    ST 499977400 CRANK PULLEY WRENCH (AT MODEL)

    Fig 1: Removing Crank Pulley Bolts
    G04997636Courtesy of SUBARU OF AMERICA, INC.
  3. Remove the crank pulley.
scientia non olet · About LEMON Manuals