LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2009 >> Outback i, Standard >> Repair and Diagnosis >> Brakes >> Parking Brake System >> Parking Brake System >> Parking Brake Assembly (Rear Disc Brake) >> Adjustment >> Shoe Clearance

Shoe Clearance

  1. Return the parking brake lever fully.
  2. Remove the adjusting hole cover from the back plate.
  3. Turn the adjusting screw using a flat tip screwdriver until the brake shoe is in close contact with the disc rotor.
    Fig 1: Turning Adjusting Screw Using Flat Tip Screwdriver
    G06339489Courtesy of SUBARU OF AMERICA, INC.
  4. Turn back (downward) the adjusting screw 3 to 4 notches.
    CAUTION: Check there is no brake drag.
  5. Install the adjusting hole cover to the back plate.
  6. Adjust the parking lever stroke. Ref. to LEVER STROKE , ADJUSTMENT, Parking Brake Assembly (Rear Disc Brake).
scientia non olet · About LEMON Manuals