Check Power Seat Switch

Move each switch and measure the resistance between connector terminals.

• Driver's seat (without memory)
  Fig 1: Identifying Power Seat Switch Connector Terminals

  Courtesy of SUBARU OF AMERICA, INC.
  RESISTANCE SPECIFICATION
  
  

  Switch position	Terminal No.	Standard
  Slide forward	7 and 14 8 and 13	Less than 10 Ω
  Slide backward	7 and 13 8 and 14	Less than 10 Ω
  Tilt up	7 and 2 8 and 1	Less than 10 Ω
  Tilt down	7 and 1 8 and 2	Less than 10 Ω
  Lifter up	7 and 5 8 and 6	Less than 10 Ω
  Lifter down	7 and 6 8 and 5	Less than 10 Ω
  Reclining forward	7 and 3 8 and 4	Less than 10 Ω
  Reclining backward	7 and 4 8 and 3	Less than 10 Ω

• Driver's seat (with memory)
  Fig 2: Identifying Power Seat Switch Connector Terminals

  Courtesy of SUBARU OF AMERICA, INC.
  RESISTANCE SPECIFICATION
  
  

  Switch position	Terminal No.	Standard
  Slide forward	13 and 7	Less than 10 Ω
  Slide backward	14 and 7	Less than 10 Ω
  Tilt up	5 and 7	Less than 10 Ω
  Tilt down	6 and 7	Less than 10 Ω
  Lifter up	2 and 7	Less than 10 Ω
  Lifter down	1 and 7	Less than 10 Ω
  Reclining forward	4 and 7	Less than 10 Ω
  Reclining backward	3 and 7	Less than 10 Ω

• Passenger's seat
  Fig 3: Identifying Power Seat Switch Connector Terminals

  Courtesy of SUBARU OF AMERICA, INC.
  RESISTANCE SPECIFICATION
  
  

  Switch position	Terminal No.	Standard
  Slide forward	7 and 13 8 and 14	Less than 10 Ω
  Slide backward	7 and 14 8 and 13	Less than 10 Ω
  Reclining forward	7 and 4 8 and 3	Less than 10 Ω
  Reclining backward	7 and 3 8 and 4	Less than 10 Ω