LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2009 >> Outback i, Standard >> Repair and Diagnosis (Single Page) >> Brakes >> Mechanical - Hydraulic >> Brake System - Brakes - Mechanical >> Stop Light Switch >> Removal

Stop Light Switch: Removal

  1. Disconnect the ground cable from the battery.
  2. Disconnect the stop light switch connector.
  3. Loosen the nuts, unscrew the stop light switch, and remove stop light switch.
    Fig 1: Identifying Stop Light Switch
    G06339469Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals