LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2009 >> Outback i, Standard >> Repair and Diagnosis (Single Page) >> Brakes >> Mechanical - Hydraulic >> Brake System - Brakes - Mechanical >> Rear Brake Pad >> Removal

Rear Brake Pad: Removal

  1. Lift up the vehicle, and remove the rear wheels.
  2. Remove the caliper bolt.
    Fig 1: Locating Caliper Bolt
    G06339418Courtesy of SUBARU OF AMERICA, INC.
  3. Raise the caliper body and support it.
    NOTE: Do not disconnect the brake hose from the caliper body.
  4. Remove the pads.
    Fig 2: Removing Pads
    G05032775Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals