Rear Brake Pad: Installation
- Apply a thin coat of Molykote M7439 (Part No. K0777YA000) or grease contained in the pad kit to the pad clip.
- Apply a thin coat of Molykote AS880N (Part No. K0779YA010) or grease contained in the pad kit to the contact surface between the pad and shim.
- Install the pad to support.
- Install the caliper body to the support.
Tightening torque: Solid disc brake model 27 N.m (2.8 kgf-m, 19.9 ft-lb)
Ventilated disc brake model 37 N.m (3.7 kgf-m, 27.2 ft-lb)