LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2009 >> Legacy i, Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Brake System - Brakes - Mechanical >> Brake Pedal >> Removal >> Mt Model

Mt Model

  1. Remove the steering shaft.
  2. Disconnect the connector (stop light switch etc.) from the pedal bracket.
  3. Remove the clevis pin which secures the lever and push rod.
  4. Remove the nut which secures the clutch master cylinder.
  5. Remove the bolt and nut which secures the pedal bracket.
    Fig 1: Locating Bolt, Nut And Pedal Bracket
    G05327402Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals