Rear Brake Pad: Inspection
Check the pad thickness A.
DISC ROTOR SPECIFICATIONS
| Type of disc rotor | Solid | Ventilated | ||
|---|---|---|---|---|
| Pad thickness | mm (in) | Standard | 9.0 (0.35) | 9.0 (0.35) |
| Wear limit | 1.5 (0.059) | 1.5 (0.059) | ||
NOTE:
- Always replace the pads of both wheels and both sides as a set.
- Replace pad clips if they are twisted or worn.
- A wear indicator is installed on the inner disc brake pad. If the pad is worn to the limit, the end of wear indicator contacts disc rotor, and a squeaking sound is heard as the wheel rotates. If the sound is heard, replace the pad.
- Replace the pad if there is oil or grease on it.