LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2009 >> Forester XT Limited >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Anti-Theft System - Security And Locks >> Body Integrated Unit >> Removal

Body Integrated Unit: Removal

NOTE:
  1. When replacing the body integrated unit
    • Prepare the security ID plate.
    • For models with immobilizers, prepare the required number of new immobilizer keys (unregistered).
    • When replacing the body integrated unit, check the current settings and record it. Refer to READ CURRENT DATA .
  2. After replacing the body integrated unit with immobilizer
    • Register the immobilizer. For detailed operation procedures, refer to the PC application help for Subaru Select Monitor.
    • Set the current settings according to what was recorded.
    1. Disconnect the ground cable from the battery.
    2. Remove the driver's side instrument panel lower cover. Refer to REMOVAL , Instrument Panel Lower Cover.
    3. Remove the knee guard panel.
    4. Disconnect the connector of body integrated unit.
      CAUTION: Be careful to keep water and other foreign materials away from body integrated unit.
    5. Remove two mounting nuts for body integrated unit bracket, and remove the body integrated unit.
Fig 1: Locating Body Integrated Unit Bracket Mounting Nuts
G05663711Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals