LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2009 >> Forester XT Limited >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrumentation System & Driver Information System - Instrumentation - Driver Info >> Combination Meter >> Removal

Combination Meter: Removal

  1. Disconnect the ground cable from battery.
  2. Set the tilt steering at the lowest position. Pull out steering wheels with telescopic functions all the way.
  3. Remove the instrument panel lower cover. Refer to REMOVAL , Instrument Panel Lower Cover.
  4. Remove the plastic hook (A), and detach the meter visor.
  5. Fig 1: Identifying Meter Visor Plastic Hook
    G05663809Courtesy of SUBARU OF AMERICA, INC.
  6. Remove the screws of the combination meter, and pull on the meter while tipping it towards yourself.
  7. Fig 2: Locating Combination Meter Screws
    G05663635Courtesy of SUBARU OF AMERICA, INC.
  8. Disconnect the connector in the rear side of combination meter to remove meter.
CAUTION:
  • Be careful not to damage the meter or instrument panel.
  • Pay particular attention to avoid damaging the meter glass.