LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2009 >> Forester XT Limited >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrumentation System & Driver Information System - Instrumentation - Driver Info >> Clock System >> Inspection >> Check Clock System Communication Circuit

Check Clock System Communication Circuit

DIAGNOSTIC PROCEDURE

Step Check Yes No
1 CHECK THE HARNESS BETWEEN CLOCK AND COMBINATION METER  .
  1. Turn the ignition switch to OFF.
  2. Disconnect the harness connector of the clock and the combination meter.
  3. Measure the resistance between the harness connector of the clock and the combination meter.

Connector & terminal 
(i59) No. 5 - (i10) No. 29: 		 Is the resistance less than 10 Ω? Replace the clock body. Repair the wiring harness.
scientia non olet · About LEMON Manuals