LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2009 >> Forester X, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrumentation System & Driver Information System - Instrumentation - Driver Info >> Combination Meter System >> Inspection >> Symptom Chart

Symptom Chart

SYMPTOM CHART

Symptoms Repair order Reference
Combination meter assembly does not operate.
  1. Power supply
  2. Ground circuit
  3. Combination meter
 Refer to CHECK POWER SUPPLY AND GROUND CIRCUIT , INSPECTION, Combination Meter System.
Speedometer does not operate.
  1. VDC C/U
  2. Harness
  3. Combination meter
 Refer to CHECK VDC CONTROL MODULE , INSPECTION, Combination Meter System.
Tachometer does not operate.
  1. ECM
  2. Harness
  3. Combination meter
 Refer to CHECK ENGINE CONTROL MODULE (ECM) , INSPECTION, Combination Meter System.
Fuel gauge does not operate.
  1. Combination meter
  2. Communication circuit
  3. Harness
  4. Body integrated unit
  5. Fuel level sensor
 Refer to CHECK FUEL LEVEL SENSOR , INSPECTION, Combination Meter System.
Warning buzzer for key left in ignition does not sound.
  1. Communication circuit
  2. Combination meter
 Refer to CHECK WARNING BUZZER FOR KEY LEFT IN IGNITION , INSPECTION, Combination Meter System.
CAUTION: When measuring the voltage and resistance of each control module or sensor, use a tapered pin with a diameter of less than 0.64 mm (0.025 in) in order to avoid poor contact. Do not insert the pin more than 2 mm (0.08 in).
scientia non olet · About LEMON Manuals