Front Brake Pad: Installation

1. Apply a thin coat of Molykote M7439 (Part No. K0770YA000) or grease contained in the pad kit to the pad clip.
   Fig 1: Identifying Grease Applying Area In Pad Kit

   Courtesy of SUBARU OF AMERICA, INC.
2. Apply a thin coat of Molykote AS880N (Part No. K0777YA010) or grease contained in the pad kit to both surfaces of the pad inner shim.
   Fig 2: Identifying Grease Applying Area On Surface Of Pad Inner Shim

   Courtesy of SUBARU OF AMERICA, INC.
3. Install the pad to the support.
4. Install the caliper body to the support.

Tightening torque: 

27 N.m (2.8 kgf-m, 19.9 ft-lb)