Front Brake Pad: Inspection
Check the pad thickness A.
PAD THICKNESS REFERENCE CHART
| Pad thickness | Standard | 11 (0.43) |
|---|---|---|
| mm (in) | Wear limit | 1.5 (0.059) |
NOTE:
- Always replace the pads of both sides as a set on both wheels.
- Replace pad clips if they are twisted or worn.
- A wear indicator is installed on the inner disc brake pad. If the pad is worn to the limit, the end of wear indicator contacts disc rotor, and a squeaking sound is heard as the wheel rotates. If the sound is heard, replace the pad.
- Replace the pad if there is oil or grease on it.