LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2009 >> Forester X, Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Brake System - Brakes - Mechanical >> Brake Pedal >> Removal >> Mt Model

Mt Model

  1. Remove the steering column. Refer to REMOVAL , Steering Column .
  2. Disconnect the connector from clutch switch.
  3. Disconnect the connector from stop light switch.
  4. Remove the clevis pin which secures the pedal and operating rod.
    Fig 1: Identifying Clevis Pin, Pedal, Snap Pin And Operating Rod
    G05957211Courtesy of SUBARU OF AMERICA, INC.
  5. Remove the nut which secures the clutch master cylinder.
  6. Remove the bolt and nut which secures the pedal bracket.
Fig 2: Locating Pedal Bracket Bolt And Nut
G05327402Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals