LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2009 >> Forester X, Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Brake System - Brakes - Mechanical >> Brake Pedal >> Removal >> At Model

At Model

  1. Remove the steering column. Refer to REMOVAL , Steering Column .
  2. Disconnect the connector from stop light switch.
  3. Remove the clevis pin which secures the brake pedal and operating rod.
    Fig 1: Identifying Clevis Pin, Pedal, Snap Pin And Operating Rod
    G05957213Courtesy of SUBARU OF AMERICA, INC.
  4. Remove the bolts and nuts which secure the brake pedal bracket.
Fig 2: Locating Brake Pedal Bracket Bolts And Nuts
G05957214Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals