LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2008 >> Tribeca Limited >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Brake System - Brakes - Mechanical >> Stop Light Switch >> Inspection >> Resistance Check

Resistance Check

  1. If stop light switch does not operate normally, replace it to a new part.
  2. Measure the resistance of the stop light switch.
    Fig 1: Measuring Resistance Of Stop Light Switch
    G05671326Courtesy of SUBARU OF AMERICA, INC.
    RESISTANCE REFERENCE

    Pedal Terminal No. Standard
    Released 1 and 4 Less than 1 Ω
    2 and 3 1 MΩ or more
    Depressed 1 and 4 1 MΩ or more
    2 and 3 Less than 1 Ω
scientia non olet · About LEMON Manuals