LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2008 >> Tribeca Limited >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Brake System - Brakes - Mechanical >> Brake Vacuum Pump >> Removal >> Brake Vacuum Pump

Brake Vacuum Pump

  1. Disconnect the ground cable from the battery.
  2. Disconnect the brake vacuum pump connector.
  3. Remove the vacuum hose.
  4. Remove the bolt, and remove the brake vacuum pump.
    Fig 1: Locating Brake Vacuum Pump Bolt
    G05671328Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals