LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2008 >> Outback R L.L. Bean Edition >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Brake System - Brakes - Mechanical >> Stop Light Switch >> Removal

Stop Light Switch: Removal

  1. Disconnect the ground cable from battery.
  2. Disconnect the stop light switch connector.
  3. Loosen the nuts, and unscrew the stop light switch to remove.
Fig 1: Removing Stop Light Switch
G03833021Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals