Removal

Tire Pressure Monitoring System

REMOVAL

TRANSMITTER (CLAMP IN TYPE)
1) Remove the wheels from the vehicle.
2) Bleed air from tire valve.
3) Remove the nut, and drop the transmitter in the tire.





4) Remove the tires from wheels.

CAUTION: Use a tire changer when removing the tire from the wheel.

5) Remove the nut to take out transmitter.

NOTE: Replace the grommet with a new part when reusing transmitter.

TRANSMITTER (SNAP IN TYPE)
1) Remove the wheels from the vehicle.
2) Remove the tires from wheels.

CAUTION: Use a tire changer when removing the tire from the wheel.

3) Loosen the screw to remove the transmitter from the valve.

NOTE: Replace the valve and screw with a new part when reusing transmitter.





4) Remove the valve stems from the wheel.