LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2008 >> Outback F4-2.5L SOHC >> Repair and Diagnosis >> Lighting and Horns >> Sensors and Switches - Lighting and Horns >> Horn Switch >> Service and Repair

Horn Switch: Service and Repair

Horn Switch

REMOVAL

CAUTION: Before servicing, be sure to read the notes in the AB section for proper handling of the driver's airbag module.

NOTE:
Horn switch is a unit with the driver's airbag module.

1. Disconnect the ground cable from battery.
2. Remove the driver's airbag module.

INSTALLATION
Install in the reverse order of removal.