LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2008 >> Outback Base, Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Brake System - Brakes - Mechanical >> Brake Pedal >> Inspection

Brake Pedal: Inspection

  1. Move the brake pedal pads in the lateral direction with a force of approx. 10 N (1 kgf, 2 lb) to ensure pedal deflection is in specified range.
    CAUTION: If excessive deflection is noted, replace the bushing with a new one.

    Deflection of brake pedal: 

    Limit 

    5.0 mm (0.197 in) or less 

    Fig 1: Moving Brake Pedal Pads In Lateral Direction
    G03833019Courtesy of SUBARU OF AMERICA, INC.
  2. Check the position of pedal pad.

    Pedal height L: 

    150 - 160 mm (5.91 - 6.30 in) 

    Brake pedal free play A: 

    0.5 - 2 mm (0.02 - 0.08 in) [When the brake pedal is pulled upward with force of less than 10 N (1 kgf, 2 lb).] 

    Fig 2: Locating Grease Applying Point
    G03833020Courtesy of SUBARU OF AMERICA, INC.
  3. If it is not within the specified value, adjust it by adjusting the brake booster operating rod length.