LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2008 >> Outback Base, Automatic >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Exterior Trim & Interior Trim >> Console Box >> Removal

Console Box: Removal

  1. Disconnect the ground cable from the battery.
  2. Remove the parking brake lever cover.
    Fig 1: Identifying Parking Brake Lever Cover
    G05670116Courtesy of SUBARU OF AMERICA, INC.
  3. Remove the bolts and clips.
    Fig 2: Removing Bolts And Clips
    G05670117Courtesy of SUBARU OF AMERICA, INC.
  4. Disconnect the connector, and remove the console box.
scientia non olet · About LEMON Manuals