Rear Brake Pad: Installation

1. Apply a thin coat of Molykote M7439 to pad clip.
   Fig 1: Locating Molykote M7439 Applying Point

   Courtesy of SUBARU OF AMERICA, INC.
2. Apply a thin coat of Molykote AS880N (Part No. K0777YA010) to the frictional portion between pad and shim.
3. Install the pad on support.
4. Install the caliper body on support.

Tightening torque: 

Solid disc brake model 

27 N.m (2.8 kgf-m, 19.9 ft-lb) 

Ventilated disc brake model 

37 N.m (3.7 kgf-m, 27.2 ft-lb)