Rear Brake Pad: Inspection
Check the pad thickness A.
BRAKE PAD THICKNESS SPECIFICATIONS
| Type of disc rotor | Solid | Ventilated | |
|---|---|---|---|
| Pad thickness mm (in) | Standard value | 9.0 (0.35) | 9.0 (0.35) |
| Wear limit | 1.5 (0.059) | 1.5 (0.059) | |
NOTE:
- Always replace the pads for both right and left wheels as a set.
- Also replace pad clips if they are twisted or worn.
- A wear indicator is provided on the inner disc brake pad. If the pad wears down to such an extent that the end of wear indicator contacts disc rotor, a squeaking sound is produced as the wheel rotates. If this sound is heard, replace the pad.
- Replace the pad if there is oil or grease on it.