LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2008 >> Outback Base, Automatic >> Repair and Diagnosis (Single Page) >> Brakes >> Mechanical - Hydraulic >> Brake System - Brakes - Mechanical >> Master Cylinder >> Removal

Master Cylinder: Removal

CAUTION: Do not allow brake fluid to come in contact with vehicle body; wash away with water and wipe off completely if spilled.
  1. Thoroughly drain the brake fluid from reservoir tank.
  2. Disconnect the fluid level gauge harness connector.
  3. Remove the brake pipes from master cylinder.
  4. Remove the master cylinder mounting nuts, and take out the master cylinder from brake booster.
scientia non olet · About LEMON Manuals