LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2008 >> Outback Base, Automatic >> Repair and Diagnosis (Single Page) >> Brakes >> Mechanical - Hydraulic >> Brake System - Brakes - Mechanical >> Brake Pipe >> Removal

Brake Pipe: Removal

NOTE: Airbag system wiring harness is routed near the center brake pipe.
CAUTION:
  • All airbag system wiring harness and connectors are colored yellow. Do not use the electrical test equipment on these circuits.
  • Be careful not to damage the airbag system wiring harness when servicing the center brake pipe.
  • When removing the brake pipe, make sure that it is not bent.