LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2008 >> Outback Base, Automatic >> Repair and Diagnosis (Single Page) >> Brakes >> Mechanical - Hydraulic >> Brake System - Brakes - Mechanical >> Brake Hose >> Removal >> Front Brake Hose

Front Brake Hose

  1. Separate the brake pipe from brake hose using a flare nut wrench.
  2. Remove the clamp, bolt at strut mount, and union bolt.
Fig 1: Removing Clamp, Strut Mount And Union Bolt
G03833009Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals