LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2008 >> Outback Base, Automatic >> Repair and Diagnosis (Single Page) >> Body & Frame >> Exterior Body Panels >> Exterior Body Panels >> Rear Sealing Cover >> Removal

Rear Sealing Cover: Removal

  1. Disconnect the ground cable from battery.
  2. Remove the rear door trim. < Ref. to REMOVAL, DOOR TRIM . >
  3. Remove the sealing cover.
    NOTE:
    • Carefully remove the butyl tape. Excessive force will easily break the cover.
    • If cover gets broken, replace it with a new part.
      Fig 1: Removing Rear Sealing Cover
      G05004584Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals