LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2008 >> Outback Base, Automatic >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Interior/Exterior Trim >> Exterior Trim & Interior Trim >> Trunk Lid Garnish >> Removal

Trunk Lid Garnish: Removal

  1. Remove the license plate, and loosen bolts (A).
    Fig 1: Identifying License Plate And Loosen Bolts
    G05023046Courtesy of SUBARU OF AMERICA, INC.
  2. Remove the clip in the upper comer of the trunk lid garnish.
    Fig 2: Removing Trunk Lid Garnish And Clip
    G05023047Courtesy of SUBARU OF AMERICA, INC.
  3. Place your hands between the trunk lid garnish and the trunk lid panel, and remove the trunk lid garnish starting from the edge, in order.
    Fig 3: Removing Trunk Lid Garnish
    G05023048Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals