LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2008 >> Outback Base, Automatic >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Interior/Exterior Trim >> Exterior Trim & Interior Trim >> Rear Gate Garnish >> Removal

Rear Gate Garnish: Removal

  1. Remove the rear gate trim. < Ref. to REMOVAL , Rear Gate Trim. >
  2. Remove clip (A), and remove the rear gate panel side cover.
    Fig 1: Identifying Rear Gate Panel Side Cover And Clip
    G05023049Courtesy of SUBARU OF AMERICA, INC.
  3. Remove the hexagon cap nut.
    Fig 2: Identifying Hexagon Cap Nut
    G05023050Courtesy of SUBARU OF AMERICA, INC.
  4. Remove the nuts, disconnect connectors, and remove the rear gate garnish.
    Fig 3: Identifying Rear Gate Garnish And Nut
    G05023051Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals