LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2008 >> Forester XT, Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Brake System - Brakes - Mechanical >> Master Cylinder >> Installation

Master Cylinder: Installation

  1. Install in the reverse order of removal.

    Tightening torque: 

    Master cylinder mounting nut 

    14 N.m (1.4 kgf-m, 10.1 ft-lb) 

    Piping flare nut 

    15 N.m (1.5 kgf-m, 10.8 ft-lb) 

    CAUTION: Be sure to use recommended brake fluid.
  2. Bleed air from the brake system. <Ref. to PROCEDURE , Air Bleeding. >
scientia non olet · About LEMON Manuals