Front Brake Pad: Inspection

Check the thickness A of pad.

Fig 1: Identifying Thickness A Of Pad

Courtesy of SUBARU OF AMERICA, INC.

THICKNESS SPECIFICATION

Pad thickness	Standard	11 mm (0.43 in)
Pad thickness	Wear limit	1.5 mm (0.06 in)

NOTE:

Always replace the pads of both sides as a set.
Replace pad clips if they are twisted or worn.
A wear indicator is installed on inner pad. If the pad is worn to the limit, the end of wear indicator contacts disc rotor, and a squeaking sound is heard as the wheel rotates. If the sound is heard, replace the pad.
Replace the pad if there is oil or grease on it.