LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2008 >> Forester XT, Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Brake System - Brakes - Mechanical >> Brake Pedal >> Installation

Brake Pedal: Installation

  1. Install in the reverse order of removal.
    CAUTION:
    • If the cable clamp is damaged, replace it with a new part.
    • Never fail to cover outer cable end with boot.
    • Be careful not to twist the accelerator cable.
    • Always use a new clevis pin.
  2. Adjust the clutch pedal. <Ref. to ADJUSTMENT , Clutch Pedal. >
  3. Check the brake pedal after installation. <Ref. to INSPECTION , Brake Pedal. >
scientia non olet · About LEMON Manuals