LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2008 >> Forester XT, Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrumentation System & Driver Information System - Instrumentation - Driver Info >> Combination Meter System >> Wiring Diagram >> Symptom Chart

Symptom Chart

SYMPTOM CHART

Symptom Repair order NOTE
Combination meter assembly does not operate.
  1. Power supply
  2. Ground distribution
 <Ref. to CHECK POWER SUPPLY AND GROUND CIRCUIT , Inspection, Combination Meter System. >
Speedometer does not operate.
  1. Vehicle speed sensor (MT model) TCM (AT model)
  2. Harness
  3. Speedometer
 MT model: <Ref. to CHECK VEHICLE SPEED SENSOR , Inspection, Combination Meter System. >
AT model: <Ref. to INSPECTION OF THE TRANSMISSION CONTROL MODULE (TCM) , Inspection, Combination Meter System. >
Tachometer does not operate.
  1. ECM
  2. Harness
  3. Tachometer
 <Ref. to CHECK ENGINE CONTROL MODULE (ECM) , Inspection, Combination Meter System. >
Fuel gauge does not operate.
  1. Fuel level sensor
  2. Harness
  3. Fuel gauge
 <Ref. to CHECK FUEL LEVEL SENSOR , Inspection, Combination Meter System. >
Engine coolant temperature gauge does not operate.
  1. Engine coolant temperature sensor
  2. Harness
  3. Engine coolant temperature gauge
 <Ref. to CHECK ENGINE COOLANT TEMPERATURE SENSOR , Inspection, Combination Meter System. >
Outside temperature indicator does not operate.
  1. Ambient sensor
  2. Harness
  3. Combination meter
 <Ref. to CHECK OUTSIDE TEMPERATURE INDICATOR , Inspection, Combination Meter System. >
scientia non olet · About LEMON Manuals