LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2008 >> Forester X, Standard >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Brake System - Brakes - Mechanical >> Stop Light Switch >> Installation

Stop Light Switch: Installation

  1. Install the stop light switch onto the bracket with screws and position it with the nut.
  2. Adjust the stop light switch position, and then tighten the nut.

    <Ref. to ADJUSTMENT , Stop Light Switch. >

    Tightening torque: 

    8 N.m (0.8 kgf-m, 5.8 ft-lb) 

scientia non olet · About LEMON Manuals