LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2008 >> Forester X, Standard >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Brake System - Brakes - Mechanical >> Hill Holder >> Removal >> PHV Cable

PHV Cable

  1. Remove the adjusting nut and lock nut.
    Fig 1: Identifying PHV Cable, Adjusting Nut And Lock Nut
    G05327417Courtesy of SUBARU OF AMERICA, INC.
  2. Remove the cable clamp, and disconnect the PHV cable from the PHV.
    CAUTION: When disconnecting the PHV cable, protect it carefully so as not to damage the boot and inner cable.
    Fig 2: Identifying Clamp And PHV Cable
    G05327418Courtesy of SUBARU OF AMERICA, INC.
  3. Remove the cable clamp from the clutch pedal bracket.
  4. Remove the PHV cable.
scientia non olet · About LEMON Manuals