LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2008 >> Forester X, Standard >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Brake System - Brakes - Mechanical >> Hill Holder >> Installation >> PHV Cable

PHV Cable

  1. The installation of the PHV cable is performed in the reverse order of removal.
    CAUTION:
    • If the cable clamp is damaged, replace it with a new part.
    • Do not bend the PHV cable sharply to avoid damage.
  2. Apply grease to the following points.
    • Return spring hook position
    • Lever cable end portion.

    Grease: 

    KOPR-KOTE (Part No. 003603001) 

  3. Adjust the PHV cable. <Ref. to ADJUSTMENT , Hill Holder. >
    CAUTION: After replacing with a new PHV cable, operate the clutch pedal approximately 30 times to break it in, then perform adjustment.
scientia non olet · About LEMON Manuals