LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2008 >> Forester X, Standard >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Brake System - Brakes - Mechanical >> Brake Pedal >> Removal >> Mt Model

Mt Model

  1. Remove the steering bolt.
  2. Raise the vehicle on a lift and remove the two bolts which secure the steering unit to the underside of the body.
  3. Lower the vehicle.
  4. Remove the instrument panel lower cover from instrument panel.
  5. Disconnect the following parts from pedal bracket.
    • Operating rod of brake booster
    • Connector (stop light switch, etc.)
  6. Remove the clevis pin which secures the lever and push rod.
  7. Remove the nut which secures the clutch master cylinder.
  8. Remove the steering assembly.
  9. Remove the accelerator pedal.
  10. Remove the bolts and nuts which secure the pedal bracket.
    Fig 1: Identifying Brake Pedal Bolts And Nuts
    G05327402Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals