Diagnostic trouble codes display mode
When diagnostic trouble code display mode is activated, the display switches to indicate engine control module, transmission control module, or ABS/VDC control module diagnostic trouble codes each time the trip knob is pushed. In addition to the type of control module, the display will show whether the diagnostic trouble codes are now being received, present, or not. If CAN communication is failed,"---" is displayed.
CONTROL MODULE STATUS
| Control module | Status | Indication |
|---|---|---|
| Engine control module | Receiving diagnostic trouble codes | Trip "A" + "P (blink)" |
| Diagnostic trouble codes present | Trip "A" + "P xxxx" | |
| No failure exists | Trip "A" + "P ----" | |
| Transmission control module | Receiving diagnostic trouble codes | Trip "B" + "P (blink)" |
| Diagnostic trouble codes present | Trip "B" + "P xxxx" | |
| No failure exists | Trip "B" + "P ----" | |
| ABS/VDC control module | Receiving diagnostic trouble codes | Trip "A" + "C (blink)" |
| Diagnostic trouble codes present | Trip "A" + "C xxxx" | |
| No failure exists | Trip "A" + "C -" | |
| CAN communication error | - | "-----" |