LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2008 >> Forester X, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrumentation System & Driver Information System - Instrumentation - Driver Info >> Combination Meter >> Removal

Combination Meter: Removal

  1. Disconnect the ground cable from battery.
  2. Set the tilt steering at the lowest position.
  3. Remove the screws and detach the meter visor.
    Fig 1: Identifying Meter Visor Screws
    G04995421Courtesy of SUBARU OF AMERICA, INC.
  4. Remove the screws of combination meter and pull out the meter toward you.
    Fig 2: Identifying Combination Meter Screws
    G04995422Courtesy of SUBARU OF AMERICA, INC.
  5. Disconnect the connector in the upper area of combination meter to remove the meter.
CAUTION:
  • Be careful not to damage the meter or instrument panel.
  • Be careful not to damage the meter glass.
scientia non olet · About LEMON Manuals