Rear

Rear Seat Belt

INSPECTION

1. OUTER SEAT BELT RH ASSEMBLY AND LH ASSEMBLY (SEDAN MODEL)
Check for the following, and replace with new parts if necessary.
- Seat belt is slackened, bent or worn. Seat belt is abnormally wound or extended.

2. SHOULDER SEAT BELT CENTER ASSEMBLY (SEDAN MODEL)
Check for the following, and replace with new parts if necessary.
- Seat belt is slackened, bent or worn. Seat belt is abnormally wound or extended.

3. CENTER SEAT BELT LH ASSEMBLY (SEDAN MODEL)
Check for the following, and replace with new parts if necessary.
- Inner belt is deformed or damaged.
- Seat belt buckle cannot be engaged properly.

4. OUTER SEAT BELT RH ASSEMBLY AND LH ASSEMBLY (WAGON MODEL)
Check for the following, and replace with new parts if necessary.
- Seat belt is slackened, bent or worn. Seat belt is abnormally wound or extended.

5. SHOULDER SEAT BELT CENTER ASSEMBLY (WAGON MODEL)
Check for the following, and replace with new parts if necessary.
- Seat belt is slackened, bent or worn. Seat belt is abnormally wound or extended.

6. CENTER SEAT BELT RH ASSEMBLY AND LH ASSEMBLY (WAGON MODEL)
Check for the following, and replace with new parts if necessary.
- Inner belt is deformed or damaged.
- Seat belt buckle cannot be engaged properly.