P0700

DTC P0700 TRANSMISSION CONTROL SYSTEM (MIL REQUEST)

1. OUTLINE OF DIAGNOSIS
AT C/U performs CAN communication. It judges as NG if malfunction is detected




2. ENABLE CONDITION

3. GENERAL DRIVING CYCLE
Always perform diagnosis continuously.




4. DIAGNOSTIC METHOD
It judges as NG if the condition malfunctions more than the predetermined time (2.5 s). It judges as OK if the condition does not malfunction, and the NG memory is cleared.

5. DTC CLEAR CONDITION
- When the OK driving cycle was completed 40 consecutive times.
- When "Clear Memory" was performed.

6. MALFUNCTION INDICATOR LIGHT CLEAR CONDITION
- When the OK driving cycle was completed 3 consecutive times.
- When "Clear Memory" was performed.

7. FAIL-SAFE
None

8. ECM OPERATING AT DTC SETTING
Store the freeze frame data. (For test mode $02)