LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2006 >> Outback F4-2.5L SOHC >> Repair and Diagnosis >> Steering and Suspension >> Wheels and Tires >> Tire Monitoring System >> Testing and Inspection >> Symptom Related Diagnostic Procedures >> Diagnosis By Symptom >> Symptom Diagnostic Procedures >> Tire Pressure Warning Light/Trouble Indicator Light Illumination Pattern

Tire Pressure Warning Light/Trouble Indicator Light Illumination Pattern

Tire Pressure Warning Light/Trouble Indicator Light Illumination Pattern

INSPECTION




1. When the tire pressure warning light does not illuminate in accordance with the illumination pattern, there must be an electrical malfunction.
2. When tire pressure warning light does not go off, check the tire pressure monitoring control module/warning light circuit, combination meter circuit.

NOTE: If problem disappeared while driving at approximately 40 km/h (25 MPH) after tire pressure warning light blinks/illuminates, warning light goes out and tire pressure monitoring system operates correctly. (For reduced air pressure or system malfunction, malfunction occurred in the past will be displayed.)