LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2006 >> Outback F4-2.5L SOHC >> Repair and Diagnosis >> Sensors and Switches >> Sensors and Switches - Lighting and Horns >> Combination Switch >> Testing and Inspection >> Combination Base Switch Assembly

Combination Base Switch Assembly

Combination Base Switch Assembly

INSPECTION

1. COMBINATION BASE SWITCH ASSEMBLY
Inspect the combination base switch assembly and roll connector for crack or deformation. If any damage is found, replace with a new one.




2. PARKING SWITCH
Measure the resistance between parking switch terminals.
scientia non olet · About LEMON Manuals