Transmission Gear Oil: Replacement

Pull out the oil level gauge.
Lift-up the vehicle.
Drain transmission gear oil completely.
CAUTION: Be careful not to burn yourself, because transmission gear oil becomes extremely hot after running.
NOTE:
- Tighten the drain plug of the transmission gear oil after draining the transmission gear oil.
- Use a new gasket.
Tightening torque:

44 N.m (4.5 kgf-m, 33 ft-lb) (Aluminum gasket)

70 N.m (7.1 kgf-m, 51 ft-lb) (Copper gasket)

Fig 1: Identifying Drain Plug
Lower the vehicle.
Pour gear oil through the gauge hole.
Recommended gear oil:

GL-5 (75W-90) or equivalent

Gear oil capacity:

3.5 l (3.7 US qt, 3.1 Imp qt)
Check the level of the transmission gear oil.
CAUTION: The level should be within the specified range marked on the gauge.